Feeds:
Posts
Comments

Posts Tagged ‘lazy kate’

tahkli and cotton--green-brown-bolls and skeins - BLOG

Nankeen Brown and Erlene’s Green cotton with a tahkli spindle. The fiber is lighter at harvest, as you see in the bolls, and darkens once you scour it.

I love to spin cotton, but I will be the first to admit that it is not an easy thing to learn. I had no knowledge of spinning any fiber when I took on cotton, but I wanted to learn to spin fiber that I grew in my garden. Wool spinners had told me it was hard to spin cotton because it was such a short fiber. However, since I would learn on cotton, I figured that would be my normal.

Cotton is a short fiber, being only about an inch or so long, more or less. You are probably familiar with seeing drop spindles that spinners use. You see them hanging from the fiber in front of the spinner while she/he works. Short fibers, such as cotton, require a lighter weight supported spindle. The tip of the spindle rests in a small dish while spinning. I needed to acquire a spindle and instruction, so I turned to Joan Ruane in Arizona. I didn’t make the trip there, but learned from her video, which came in a kit that included a tahkli spindle, support dish, bobbins, and cotton sliver. It took much practice to go beyond something that resembled rope to something that resembled thread, but I kept at it. Eventually muscle memory kicked in and things got easier. Joining a handspinning group helped tremendously.

When you look for cotton fiber to spin, most likely what you will find is cotton sliver, which is a long rope-like preparation. You might come across roving, which is a thinner preparation of sliver. I often use the words sliver and roving interchangably. I learned when working with sliver that, by dividing it lengthwise into several strands, it was easier to work with if I only used a strand at a time. You might also find cotton in the form of punis, which is cotton that has been carded and rolled into cigar shapes. I have never spun from punis.

lazy kate-bobbins and carboard box - BLOG

Box holding tahkli for winding off; plastic, wood, and homemade bamboo bobbins; lazy kate that holds two bobbins for plying.

None of those preparations are quite like what you will be working with from your homegrown cotton, but it is something to learn from. I believe that anyone learning to spin should learn to spin with a spindle before progressing to a wheel. For one thing, it is cheaper to get started. Also, you gain skills that will help you with any spinning. With only one tahkli spindle I was able to spin enough cotton to make my vest, which you can learn more about here. Once the spindle was full, I would wind it off onto a bobbin and fill the spindle again. In the photo you can see the cardboard box I used to hold the spindle while I wound off onto bobbins. I bought plastic and wooden bobbins and even made some from bamboo. With 2 bobbins on a lazy kate, I could ply the cotton on a larger spindle made with a dowel and 2” wooden wheel. I used 2-ply cotton for both warp and weft when I wove the fabric.

book charkha-cotton-seeds-mat - BLOG

Indian book charkha from New World Textiles.

After the vest, I made a shirt. By this time I had acquired an Indian book charkha from New World Textiles and used that to spin all the cotton for the shirt. I had also acquired a Louet S10 spinning wheel. I used the spinning wheel for the plying, but I needed to get a high-speed bobbin to do it. No matter how fast I treadled, the regular bobbin did not go around fast enough. Cotton requires a high spinning ratio. Plying with the wooden spindle worked great, but using the spinning wheel for that job was faster.

I can spin off the seed with the tahkli, but find the charkha is so fast that it is better to take the seeds out first, which I do by hand. However, when I first started working with cotton I thought I would need to card it. Cotton cards cost more than I wanted to spend for a project I was just getting into, so I bought dog brushes at the pet store. They worked fine. I’ve since acquired regular cotton cards, but the lighter weight dog brushes are great for starting out. I only card the fiber if it has become compacted. I’m working with some cotton right now that I didn’t grow. This cotton had the seeds removed with an electric cotton gin and I find that I need to card the fiber before spinning. Some spinners card cotton and roll it into punis. I find that unnecessary. The fiber that I’ve taken the seeds from is loose enough to spin as it is and the fiber that I’ve carded is also loose enough. Of course, spinning it off the seed is the easiest way and that can happen with your homegrown supply.

Sliver, roving, and punis are fiber preparations that are better for commercial transactions. They can be manufactured, measured, stored, and shipped easier than working with cotton fluff pulled from the seed. Actually, in manufacturing, the fiber isn’t pulled from seeds, it is cut from them in the ginning process.

balls of cotton for shirt and swift - BLOG

Swift with skeins and balls of naturally colored cotton for a shirt.

When I made the vest, I worked with one spindle at a time and put the fiber on bobbins. From there it went into skeins. Since three spindles came with the charkha, once I had three spindles full, I wound the fiber from all three spindles into one skein using my swift. Lacking a swift, you could wind it around anything that you could remove it easily from. I scoured the skeins by boiling them in a large pot of water with washing soda and a bit of soap. That is when the color pops. The fiber was then wound into balls over a core of crumpled paper. The balls you see of cotton in this photo are what I prepared for my shirt.

The cotton you grow in your garden is a premium product. Hand picking ensures that the fiber is never subjected to the harsh treatments that commercial cotton is. Take care in the picking to not also gather leaves or other bits of the plant that will dry and be hard to pick out later. Removing the seeds by hand is not hard. You can take a small bag of seeded cotton with you anywhere and work on the seeds while you are waiting for whatever you need to wait for. It is good to keep your hands busy. Save the seeds to plant next year.

For spinning, I have recently moved up to a Bosworth attache charkha, which is wonderful. As much as I like it, I would hope that you start your cotton journey with a tahkli, like I did. I still use my tahlki and spin with it in public whenever I can. Spinning in public is a great way to meet people and spread the word that this is actually something you can do, not something out of the history books. Have fun spinning!homeplace earth

Advertisements

Read Full Post »

%d bloggers like this: